LTV Sensor Resets - No Outdoor Temp (Units With NO Extra Sensor Area)

No Outdoor Temp (Units with no extra sensor area) 

Sync/Re-Sync the temperature/humidity sensor to the indoor display.

1. Bring the sensor 5-10 feet from the indoor display, remove the batteries and locate the TX button above the left battery.
2. Press and release the SENSOR button on the indoor display 2 times to view your sensor ID number (Dashes may appear for the ID).
3. While viewing your sensor ID, hold the MINUS button for 5 seconds to delete the sensor ID (Dashes may appear for the ID).
4. Place fresh batteries in the sensor and press and release the TX button 3 times.
5. Allow up to three minutes for the station to find the sensor. 

If you do not see outdoor temperature, try a full factory reset.

1. Hold the RAIN and LIGHT OR ALERTS and LIGHT buttons together for 5 seconds or until the station resets.
2. Unplug AC cord from display, remove batteries and press any button on the display 20 times before powering back up.
3. If the station was connected to Wi-Fi, you will need to reconnect. Open the La Crosse View app. go to Menu -> Connect Wi-Fi.  Follow the on screen prompts to configure the Wi-Fi on your display.