If you are seeing “NO” or dashes for your outdoor readings, please try the following steps:
1. Press and hold the + button on your indoor display (until the station beeps or for about 3 seconds) to search for your outdoor sensor. The Reception Indicator will begin to animate.
2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside next to the display and remove power from both the sensor and station.
3. Press any button on the station 20 times and leave the parts sit for a few
moments with the power off.
4. Install a new set of alkaline batteries into the sensor, then into your station. For additional help visit: bit.ly/basic_restart